Diamond Wheels, PCD & CBN Wheels, Carbide Cutting Tools, Coated Abrasives & Chemicals - | The One Stop Shop for all your Cutting Tool Needs |
 
       

A SYNTHETIC ADDITIVE TO WATER USED IN COOLING TOWERS

Product Data

       
  DESCRIPTION    
A green fluid, which gives a fluorescent green solution on dilution with water.
 
APPLICATION
  • As a special purpose additive for protection against Rusting, Oxidation, Scaling etc.
  • As an efficient coolant additive to the water, used in cooling towers and other such systems in Plastic injection moulding machines.
   
ADVANTAGES  
  1. Excellent cooling of flow lines (Pipes) and prevention of rusting and scaling.
  2. Excellent compatibility with hard water, counters water hardness very efficiently.
  3. Ensures rust and scale protection in die cavity, punch and cooling bore. Therefore no
    or minimum down line due to descaling while in production.
  4. Better, die cooling results in better rate of production.
  5. Efficient cooling in flow lines in oil cooling cylinder reduces the risk of jamming of
    cooling lines or oil over heating.
  6. Reduced frequency of descaling ensures longer life for the systems.
INSTRUCTIONS FOR USE
  1. For new systems, add Dyna Cool in 1:50 dilution with water.
  2. For old systems descale the systems first and then flush with fresh water. Add Dyna Cool in 1: 50 dilution with water.
  3. Top up as required in the recommended dilution ratio to make up for the evaporation loss.
  4. Technical & material safely datasheets are always available on request.